Before you go replacing your headlights, which can be expensive, you can clean and restore your headlights yourself. All it takes is a couple of household products and some elbow grease. Here, we will take you through exactly what to do to get your headlights beaming again.
Check out how to jump start your car Here’s how to remove ice from a driveway
How to clean headlights with toothpaste
The following methods are suitable for headlights which are just starting to dim and show signs of yellowing. If these techniques don’t work, you will need to try a more abrasive method, such as one of the ones mentioned further in the guide. Masking tape Microfiber cloths Car wax Toothpaste OR Baking soda White distilled vinegar 2. Rinse and then immediately move onto the next step. 3. Cover the edges of your car around the headlights with masking tape, to protect the paint from damage. 4. Squeeze a decent amount of toothpaste into a clean microfiber cloth and apply it directly to the wet headlight. You want to rub in circular motions and cover the entire surface. You can add more water as needed to help with the application and create a lather. 5. Don’t be afraid to be firm as you apply the toothpaste. The idea is its abrasiveness should scrape off the residue which has built up on your headlight. You want to spend about 5-10 minutes per headlight. 6. Rinse each headlight with warm water. Make sure any residual toothpaste isn’t left to dry on your vehicle as it drains off. 7. Leave the headlights to dry before buffing with a clean microfiber cloth. If you don’t have enough toothpaste to hand, you can also substitute it with white distilled vinegar and baking soda. Simply combine two parts of white vinegar with one part baking soda to make a loose paste (expect some fizzing!). Then apply using a microfiber cloth with the same method as above and rinse.
How to restore headlights with sandpaper
If this hasn’t done the trick, then you’re going to have to use something a little stronger. Using sandpaper can seem daunting because you’re pretty much sanding off the top layer of your headlight, but it does work. And you can still seal and protect it afterwards, so it looks like new. Masking tape Sandpaper of varying grit Car polish Microfiber cloth Car wax
- First, clean your headlights using warm soapy water as above and rinse.
- Leave to dry and use masking tape to protect the surrounding area.
- Start by soaking the sandpaper in water, and then work in a horizontal direction from side-to-side across the headlight.
- Then switch to a horizontal motion using a finer grit sandpaper, such as 1,000. Keep rinsing as needed.
- Next, move onto a 3,000 grit sandpaper and continue to use the same motions until the headlights feel smooth to the touch.
- Rinse the headlights — don’t worry if they appear scratched at this stage; it’s completely normal.
- Leave the polish to dry, then buff away any residue using a microfiber cloth. If you notice any spots still appear foggy, reapply the polish and repeat from step eight.
- Finally, seal and protect your headlights using car wax. Your headlights should now be looking crystal clear again. Remember, if you’re uncomfortable sanding down your headlights, you can always ask a professional. There’s also headlight restoration kits available, although for those you should always follow the given instructions. Now your headlights are looking great, you might want to learn how to jump start your car in case of an emergency. And if it’s time for an upgrade, check out 9 essential tips for buying an electric car.
